Products

Impulse Cooler system

Features

  • Windowed Control.
  • Graph showing tracking.
  • 24-hour quality record.
  • Mold picture display.
  • Up to 1,000 sets of mold data memory.
  • Upper and lower limits of production mold temperature difference.

Product Introduction

Model：PC-05-25-01~05

Benefits of Impulse Cooler

  1. Improve cooling efficiency
    Intermittent water supply can maintain a large temperature difference on the mold surface, which helps to improve heat transfer efficiency. The cooling time can be shortened by 10% to 40%, depending on the mold and finished product structure.
  2. Improve the quality of finished products
    Reduce the chance of warping and deformation. Improve surface finish and reduce problems such as sink marks and weld lines. It helps to stabilize the cooling of microstructured or thin-walled products.
  3. Energy saving and cost control
    The operation time of cooling water pump and temperature control system is reduced, thus reducing energy consumption. Increasing the utilization rate of recycled water will help save water resources.
  4. Reduce mold thermal fatigue
    The temperature change is more stable, and the mold is subjected to less pressure due to thermal expansion and contraction cycles, which helps to extend the life of the mold.
  5. Flexible Control
    Can be used with temperature control system to set cooling frequency and time for specific areas, suitable for multi-cavity and complex molds.